You are here: HOME » News » Useful Skills » Engraving machine in the finished sheet punch method

Engraving machine in the finished sheet punch method

Views:3     Author:Site Editor     Publish Time: 2016-05-31      Origin:Site

Engraving machine in the finished sheet punch method. Jinan Acut CNC Equipment Co.,Ltd. based cooperative research and development, promoting high-tech, high-quality ideas, engage in research and manufacturing of CNC products in advertising, laser, woodworking and other areas, with a forge ahead, to share the results of the fighting spirit and the credibility of the first First, service-oriented principle of service, steady and sustainable development.
So engraving machine on the finished perforated sheet method, what does Here we have to explain in detail:
First, if it is perforated in the finished sheet, it needs to be fixed in the engraving machine table, to determine a good size. When the knife on the knife against one corner of the plate. And draw a sheet the same size and in the software, and then draw a good hole size and location. Note that the software to be close to the edge of the graphic layout. Such as registration and will play the software settings. Finally, select only the output aperture enough.
Second, if you just make a tool and as coarse holes. You can manually. Directly from the tool rotation, manual down on the line

QUICK LINKS

ADDRESS

Telephone: 86-531-88633033
Mobile Phone: 18615200028
Fax: 86-531-88633055
Zip Code: 250000
Address: No.240 Beixindian Village, Hehua Road, Licheng District, Jinan City, Shandong Province.

COMPANY

Name: Jinan Acut CNC Equipment Co., Ltd.

Email: acut@acut.cn

SHARE

Copyright © 2016 Jinan Acut CNC Equipment Co., Ltd. All rights reserved. Supported by Leadong.com