You are here: HOME » News » Fault Analysis » Wood engraving machine spindle motor four faults and solutions

Wood engraving machine spindle motor four faults and solutions

Views:2     Author:Site Editor     Publish Time: 2016-05-31      Origin:Site

Wood engraving machine spindle motor four faults and solutions. Jinan Acut CNC Equipment Co.,Ltd. based cooperative research and development, promoting high-tech, high-quality ideas, engage in research and manufacturing of CNC products in advertising, laser, woodworking and other areas, with a forge ahead, the outcome share fighting spirit and credibility of the first, service-oriented principle of service, steady and sustainable development.
? So the four wood engraving machine spindle motor faults and solutions which do Here we have to explain in detail:
A motor made strange noises: Solution: Check whether the motor is overloaded; there could be an internal motor fault, should be promptly repaired or replaced.
Second, the motor reversal: Solution: Check the motor cable is directly phase or the output UVW terminal exchange
Third, the motor did not feel the effort, will not turn: Solution: Check the power circuit, check whether the motor phase line or cable is short-circuited.
Fourth, engraving machine spindle motor is hot: Solution: Check the pump is working, and to look at whether the lower level of circulating water.
Summary: For the engraving machine spindle motor, I hope we still pay more attention to maintenance!

QUICK LINKS

ADDRESS

Telephone: 86-531-88633033
Mobile Phone: 18615200028
Fax: 86-531-88633055
Zip Code: 250000
Address: No.240 Beixindian Village, Hehua Road, Licheng District, Jinan City, Shandong Province.

COMPANY

Name: Jinan Acut CNC Equipment Co., Ltd.

Email: acut@acut.cn

SHARE

Copyright © 2016 Jinan Acut CNC Equipment Co., Ltd. All rights reserved. Supported by Leadong.com