You are here: HOME » RESOURCE » News
  • 05-31
    Engraving machine in the finished sheet punch method

    First, if it is perforated in the finished sheet, it needs to be fixed in the engraving machine table, to determine a good size. When the knife on the knife against one corner of the plate. And draw a sheet the same size and in the software, and then draw a good hole size and location. Read More »

  • 05-31
    Wood engraving machine spindle motor four faults and solutions

    Wood engraving machine spindle motor four faults and solutions. Jinan Acut CNC Equipment Co.,Ltd. based cooperative research and development, promoting high-tech, high-quality ideas, engage in research and manufacturing of CNC products in advertising, laser, woodworking and other areas, with a forge ahead, the outcome share fighting spirit and credibility of the first, service-oriented principle of service, steady and sustainable development.? So the four wood engraving machine spindle motor faults and solutions which do Here we have to explain in detail:A motor made strange noises: Solution: Check whether the motor is overloaded; there could be an internal motor fault, should be promptly repaired or replaced.Second, the motor reversal: Solution: Check the motor cable is directly phase or the output UVW terminal exchangeThird, the motor did not feel the effort, will not turn: Solution: Check the power circuit, check whether the motor phase line or cable is short-circuited.Fourth, engra Read More »

  • 05-31
    DSP control system and engraving machine Weihong control system differences

    Then the DSP control system woodworking engraving machine Weihong control system and the difference between what does the engraving machine how to distinguish between two different systems it Here we have to explain in detail. Read More »

  • 05-31
    How to make wood engraving machine engraving higher accuracy

    If engraving machine tool accuracy is not high enough Duandao likely to cause, waste status, this condition is generally due to the central processing engraving machine spindle rotation center and the engraving machine tool inconsistent rotation caused by different heart . Read More »

  • Total 10 pages  Go to Page
  • Go



Telephone: 86-531-88633033
Mobile Phone: 18615200028
Fax: 86-531-88633055
Zip Code: 250000
Address: No.240 Beixindian Village, Hehua Road, Licheng District, Jinan City, Shandong Province.


Name: Jinan Acut CNC Equipment Co., Ltd.



Copyright © 2016 Jinan Acut CNC Equipment Co., Ltd. All rights reserved. Supported by